✅ Max. Sewing Speed: 5500 stitches/minute + Reverse Lift of Presser Foot by Hand: 5.5 mm + by Knee: 13 mm
✅Max. Stitch Length: 5mm + Needle: DB X 1, sizes 9-18
✅ Includes: Thread Stand Bobbin Winder Oil Pan/Knee Lifter 5 Extra Bobbins 10 Extra Needles Instruction Manual Screw Driver Machine Oil Table top (size 48" x 20") Heavy Duty Legs, Table Top,*Servo motor V Belt Hardware
✅For light-medium weight materials- NOT a walking foot machine. Electronic iKonix DC Servo Motor 3/4 H.P, 1 PHASE, 110 VOLT, 0 ~3300 RPM,
✅ ASSEMBLY REQUIRED, please note machine comes unanssembled
Dual-Tension Mechanism The 1-needle type machine has adopted a dual-tension mechanism, with which the machine can support high-tension sewing with thick thread. This means that the machine produces seams of excellent quality on a broader range of materia
For Extra Heavy-Duty Materials With its sufficient needlebar stroke of 38mm and long 190R needle, the machine supports the sewing of extra heavy materials
The stitch length can be easily selected by the stitch dial.
The machine is provided with many improved features that offer enhanced operability such as an easy-to-observe area around the needle, placement of the bobbin winder on the front face of the machine arm, and a large handwheel (? 160).
A knee-lifter mechanism is built in the bed. This reduces the pressure required to operate the knee-lifter and facilitates setup. (Machines equipped with automatic thread trimmer are excluded.)
Direct Drive: Adoption of the direct-drive mechanism improves stop accuracy and responsiveness, leading to increased working efficiency. | Semi-Dry Head: All models of the LH-3500A Series are provided with a semi-dry head to eliminate staining with oil fr
Bobbin Counter Function: The operator is notified that the bobbin needs to be replaced before the bobbin thread runs out. Since the operator is notified of the time to replace the bobbin, the operator is no longer required to carry out the re-sewing of se
The Feed Method can be Easily Changed Over: The location of the oil tank has been changed to the inside of the sewing machine through our re-investigation of the lubricating method. As a result, space is secured under the bed surface to facilitate changeo
Thread Tension Control: A thread tension control mechanism has been developed for each type of sewing machine in order to achieve the best-suited thread tension for its purpose.
Material-Friendly Micro-Lifter Mechanism: The presser foot can be lifted by a minute amount by adjusting the eccentric pin located in the presser lifter lever section. When sewing shaggy and elastic fabrics, the load applied to the material is reduced by
This website displays data from third party public sources. We do not endorse or disapprove of any products presented here. The data presented is for information purposes only. We can't guarantee correctness and completeness of all the data presented here, and therefore will not accept liability for any issues arising from usage of this data. All Trademarks and Copyrights belong to their respective owners. As an Amazon Associate this website earns from qualifying purchases at no extra cost to you.